Secure Payments by PayPal

Visa, Visa Delta, Visa Electron, MasterCard, Maestro, Solo

Shure PSM200 Wireless In-Ear Monitor System

Shure PSM200 Wireless In-Ear Monitor System
  Zoom
Our Price:  £420.00(Inc. 20% VAT)Earn 420 Loyalty Points
+

Brand:  Shure

Availability:  

  

Shure


The entry to professional in ear personal monitoring from Shure. This package contains SE-112 Sound Isolating earphones, a P2R receiver and a P2T transmixer.

 

SE112

Sound Isolating Design, blocks up to 37 dB of ambient noise

  • Driver: Single DynamicMicroDriver

  • Frequency response: 25 Hz - 17 kHz

 

 

P2R Wireless Bodypack Receiver

Can operate as a wired or wireless bodypack, or both simulaneously

  • Frequency locator

  • Built-in headphone limiter

  • Integrated cable management

  • High-impact plastic chassis

  • 1/4" Line input jack with high/low gain switch

 

P2T Wireless Transmixer

Input level control

  • Frequency select

  • Built-in audio limiter

  • Front mounted antenna

  • Two mic/line input channels for mix control

  • 1/2 Rack space

  • LED Indicators

  • Tri-color input level

 

Features

Built-in audio limiter

  • Front mounted antenna

  • Two mic/line input channels for mix control

  • Built in headphone limiter

  • Volume control on bodypack receiver

  • 1/2 Rack space

 

WHY IS IN EAR MONITORING MORE EFFECTIVE THAN USING A WEDGE SPEAKER ON STAGE?

Using a Shure monitoring system allows you to hear the music via your earphones at the exact time it is played. There can be a short delay in music coming out of the wedge, which can cause performers to play out of time. Wedge monitors will sound fine when standing in one position, but if you move to the left or right, that sound is likely to change. With in ear personal monitoring, the sound will be constant and comes with you, wherever you go. Using wedge monitors long term can also be damaging to your ears. Using Shure sound isolating earphones cuts out the sound around you leaving you to focus on playing in time.

HOW DO I SET UP MY PSM 200 IN EAR SYSTEM?

Simply connect two line-level or mic–level inputs directly into the transmixer. Set the frequency on the transmixer using a single button, and the same again on the bodypack receiver. Connect your earphones to the P2R, set up your desired mix using the personal mix controls on the front of the transmixer and you are now all ready to go.
 

 

Specifications

 

  • RF Output Power: 10 - 30 mW (countryspecific)

  • Operating Distance: Up to 100m

  • Harmonic distortion: 1.5 % typical

  • Signal-to-noise-ratio: 80 dB (A) typical

  • Listening mode: Mono

  • Compatible Systems per band (up to): 4

  • Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level

  • Transmitter Outputs: 2x XLR split outputs

  • Wired Bodypack Option: Yes

  • Personal Mix Control: On transmitter

  • Remoteable Transmitter: No

  • Battery Life: Wired: 6 h; Wireless: 4 h

  • Frequency Response: 30 Hz - 12 kHz

     

PSM®200 System

     

    • RF Carrier Frequency Range: 606 - 638 MHz

    • Modulation: FM +/- 35 kHz Deviation (Nominal)

    • Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)

     

    EP2T TransMixer

      • Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)

      • Antenna: 1/4 Wavelength, semi-rigid, PCB Mount

      • Connector Type: XLR/1/4-inch combo

      • Nominal Input Level: - 25 dBu @ 1/2 volume (12 o'clock)

      • Maximum Input Level: - 5 dBu @ 1/2 volume (12 o'clock)

      • Current: 170 mA maximum

      • Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)

      • Net Weight: 370 g (13 oz.)

     

    P2R Receiver

      • RF Sensitivity: 109 dBm typical

      • Squelch Threshold: 102 dBm typical

      • Antenna: Attached Whip

      • Audio Input Connector: Connector Type: 1/4-inch Mono

      • Impedance: 1 megohm

      • Maximum Input Level: LO = +0 dBu; HI = 10 dBu

      • Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent

      • Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended

      • Audio Output Connector: 1/8 inch (3.5 mm)

      • Minimum Load Impedance: 8 ohms

      • Net Weight: 100 g (3.52 oz.), less battery

      • Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

     

    SE112 Earphones

      • Frequency Range: 25Hz – 17.5kHz

      • Sensitivity: 108 dB SPL/mW (@ 1kHz)

      • Impedance: 16 Ohms (@ 1kHz)

      • Input Connector: 3.5mm (1/8”)

      • Colour: Gray

      • Cable Length: 127 cm (64”)

     


    Customer Reviews

    Be the first to Write a Review for this item!

    Related Products
    Shure EABKF1 Foam Sleeves for Earphones - BLK - Large - 5 Pairs

    Shure EABKF1 Foam Sleeves for Earphones - BLK - Large - 5 Pairs£16.99

    Black Foam replacement sleeves for Shure sound isolating earphones - Large

    Shure EABKF1 Foam Sleeves for Earphones - BLK - Small - 5 Pairs

    Shure EABKF1 Foam Sleeves for Earphones - BLK - Small - 5 Pairs£16.99

    Black Foam replacement sleeves for Shure sound isolating earphones - Small

    Interest Free Finance

    Customer Feedback