Secure Payments by PayPal

Visa, Visa Delta, Visa Electron, MasterCard, Maestro, Solo

Line 6 DT25 Valve Head & Line 6 1x12 Cab - Used

Line 6 DT25 Valve Head & Line 6 1x12 Cab - Used
Line 6 DT25 Valve Head & Line 6 1x12 Cab - UsedLine 6 DT25 Valve Head & Line 6 1x12 Cab - UsedLine 6 DT25 Valve Head & Line 6 1x12 Cab - Used
Line 6 DT25 Valve Head & Line 6 1x12 Cab - UsedLine 6 DT25 Valve Head & Line 6 1x12 Cab - UsedLine 6 DT25 Valve Head & Line 6 1x12 Cab - Used
Our Price:  £549.00(Inc. 20% VAT)Earn 549 Loyalty Points

Brand:  Line 6



Line 6

Official Line 6 Dealer


Used DT25 Cab + Head, In perfect condition with only a few signs of use.

Four Boutique Tube Amps In One

Featuring four stunning amp voicings and incredible HD preamp and tone stack modeling, DT25™ delivers the classic tube tone you crave—with unprecedented versatility for modern guitarists. Designed by Line 6 and tube amp guru Reinhold Bogner, the portable DT25 gives you the foundation to build your perfect tone. It’s actually four amps in one—choose from American clean, British crunch, class A chime, or modern high-gain. You can dial in classic vintage tones, or reconfigure analog components to create highly customized original sounds.

Build The Tube Amp Of Your Dreams

With traditional tube amps, your tone is set in stone. DT25 is different. Featuring a truly innovative design, DT25 allows you to reconfigure various analog components and build the custom tube amp of your dreams. Chose from 30 HD preamps—then tweak the negative feedback loop, operating class, power tube mode, and more in the reconfigurable tube power amp. You get an incredibly wide sonic palette, so you can finally dial up the tones in your head.

Meet Reinhold Bogner, A Legend In Tube Amp Design

The man who revitalized Eddie Van Halen’s famous #1 Marshall® plexi, Reinhold Bogner is one of the most respected names in the world of tube amplifiers. After getting his start in Germany, he moved to Los Angeles in 1989 and quickly earned a devoted following of discerning guitarists. Since then, his amps have graced the stages and studios of some of the world’s best players, including Jerry Cantrell, Lyle Workman, Wes Borland, Chris DeGarmo, Keith Urban, Richie Sambora, Steve Stevens, Dan Huff, Allan Holdsworth, Mike Landau, Steve Vai, Eddie Van Halen, and more. Today, Bogner continues to issue one legendary tube amp design after another—and his list of devotees keeps growing.

Built-In Low Volume Mode

With DT25, you don’t have to crank the volume to 10 to get great tone. Low Volume Mode allows you to achieve shimmering clean tones or searing high-gain tones, at a fraction of the volume of regular tube amps. The tubes distort less in Low Volume mode, so the rich power amp modeling technology in DT25 picks up the slack and fills out the tone. Unlike a traditional master volume, you won’t lose any of your highs or lows—DT25 sounds like it’s cranked up, even at low volume levels.
Celestion® speakers are renowned for their quality and are used in countless classic tube amps worldwide. DT25 combos and extension cabinets are equipped with custom-voiced Celestion G12H-90 speakers, delivering optimum tonal depth and clarity.

The Power Of L6 Link

When you combine DT25™ and POD® HD via the L6 LINK™ connection, you get an extraordinarily powerful and integrated guitar rig capable of creating any vintage or modern tone you need. POD HD presets automatically reconfigure the amp’s tube bias, output class, and more to compliment the selected HD amp model. Add a James Tyler® Variax® or Variax Standard modeling guitar to the mix, and you can simultaneously change your DT25 configuration, POD HD preset, and Variax model and alternate tuning. You can then save your custom configuration as a POD HD preset for instant recall.

How About All Of Thos HD Models?

When you connect DT25 and POD HD using L6 LINK, the amp instantly has access to POD HD’s full collection of HD amp models and M-class effects. Set the POD HD to an HD preamp-only model to tap into the fully analog tube output stage of the DT25, and you’ll experience unparalleled dynamics and touch sensitivity. Plus, the massive collection of M-class effects that come with POD HD are grafted seamlessly onto the DT25—giving you massive array of tonal options. For example, your POD HD effects can be laid out with a virtual effects loop—you can place your compressor, distortion and modulation in front of the preamp model, with the delay and reverb feeding into the DT25 power section.

Advanced Scalability And Power

The innovative L6 LINK jacks enable you to combine DT25 with your other Line 6 gear and unlock new levels of sonic potential. All it takes to make an L6 LINK connection is a single XLR cable. L6 LINK connections are free of the noise and hum issues you can run into when trying to achieve similar functionality with the four-cable method and other multi-cable configurations.

DT25 Gives You Flexible Configuration

Combine multiple DT25 amps to create incredible stereo rigs, wet/dry setups, and more. You can also use a standard MIDI switching system to control channel, voicing, reverb on/off, pentode/triode mode, and class A/AB selection. If you need channel switching and global reverb switching, connect any standard two-button footswitch with a TRS cable, or use a single-button footswitch connected with a TS (mono) cable for channel switching only. Or maybe you’ll want to leverage the Send and Return jacks to create a serial effects loop that taps the signal chain post-preamp. DT-amps will also let you connect an XLR cable direct out to a PA, mixer, or recording interface to recreate every detail of your tone, complete with full cab simulation. Or, connect a single 4-ohm, 8-ohm, or 16-ohm cab—or two 4-ohm or two 8-ohm cabs at a time. No matter what your needs may be, DT25 gives you a wide range of options for configuring your rig.


DT25 Guitar Amplifier Head

  • Flexible tube section designed by tube-amp guru Reinhold Bogner
  • Reconfigurable analog components for each channel
  • Selectable operating class (lass AB/25 watts/fixed bias or Class A/10 watts/cathode biased)
  • Selectable power tube mode (pentode or triode)
  • Four unique Voicings (negative feedback loop topologies paired with HD preamp and tone stack modeling):

Classic American—clean/tight NFL
British Crunch—medium NFL
Class A Chime—zero NFL
Modern, High-Gain—resonant NFL

  • (1) 12AX7, (2) EL84 tubes
  • 4/8/16 ohm speaker outputs
  • Series effects loop
  • Intuitive, 2-channel design
  • Back-lit front panel
  • HD preamp and tone stack modeling technology
  • Modeled spring reverb with individual level control per channel
  • Cabinet-simulated direct output
  • Low Volume Mode
  • Speaker jack-sensing provides relay driven output transformer protection circuit
  • L6 LINK connects DT25 to POD HD
  • DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

DT25 112 Extension Cab

  • The perfect cab for DT25 amplifiers
  • Front-ported, closed-back design
  • 12-inch custom Celestion G12H-90 speaker

Customer Reviews

Be the first to Write a Review for this item!

Interest Free Finance

Customer Feedback